Nemarit Engineering Private Limited

TRIPLE ROLLER MILL MACHINE:-

ü Useful for precision grinding of ointments, paints, inks etc.

ü Hard chrome plated rollers made from special alloy steel.

ü Scraper fitted to prevent leakage or waste.

ü Provision of SS tray below the rollers.

• Item Code: KSD-RC
• Delivery Time: 4-5 weeks
• Packaging Details: As per Customer demand

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: ICD Ahmedabad

SINGLE STIRRER OSCILLATING

GRANULATOR MACHINE:-

ü  Sturdy and durable.

ü  Easy to operate / clean / maintain.

ü  Noise level minimum.                 

ü  Large output.

ü  Continuous oscillating stirrers drive.

ü  Simple screen holding and tensioning device.

ü  Screen – Available in different size / durable / cost effective.

ü  Flameproof electrical components are available at an extra cost.

Technical Specifications:

    * Depends on material and screen size.

Salient Features:

ü Robust and durable

ü Efficient and dependable.

ü Quiet in operation.

ü Continuous oscillating stirrers drive.

ü Easy to clean. Entire working zone and stirrer can be dismantled quickly without using spanners.

ü Simple screen holding and tensioning device.

ü Availability of different mesh size of screen.

 ü Long life and economic cost of screen.

MULTI MILL MACHINE:-

ü  Direction of beaters can be changed by reversible switch.

ü  All contact parts can be easily and quickly dismantled and cleaned.

ü  Machine is designed for continuous operation.

ü  Cylindrical screen for higher output.

ü  Castor wheels provided for mobility.

ü  Flameproof electrical components can be provided at extra cost.

ü  Beaters and scraper blades of S.S. 304 quality. (SS 316 optional as an extra cost)

S. S. Perforated Screens:

·         0.5, 1.0, 1.5 mm Hole Dia.

·         2, 3, 4, 5, 6 mm Hole Dia.

·         7, 8, 10, 15, 20, 25 mm Hole Dia.

S. S. Wire Mesh Sieve:

·         4, 6, 8, 10, 12, 14, 16, 20, 24, 30, 40, 50, 40, 50, 60 Mesh

ü  GMP point of view machine is provided with S. S. cladding on base, S. S. belt guards, S. S. cover on motor. No exposed painted surface on top of the machine. Motor rails, screw and guide rods are chrome plated.

ü  Beaters assembly bearings are in separate pillow blocks for ease in maintenance.

ü  Very less down time as only beaters assembly will have to be reversed (and not the complete chamber) for making it knife to impact forward or vice-versa which can be done by single operator.

ü  Fixed beaters assemblies is provided as a standard supply which increase the output by 10% to 30% reduces noise level and also ease to clean as there are no cavities. (If product demands, swing beaters assembly can be provided.)

ü  Beaters and shaft are of stainless steel 410 quality and beaters are further hardened and chrome plated. Beaters are fitted on a splined shaft.

ü  Transmission of heat to the chamber from bearings is low as they are away in separate pillow blocks. This facilitates to some extent in processing of heat sensitive products.

ü  Castors provided for mobility and breaks can be applied for fixing machine at one place.

ü  Beaters assembly is dynamically balanced which reduce vibration and noise level and increases bearings life.

ü  Machine is available in plain & water-jacketed models. Flame proof Motor can be provided on demand at extra cost.

Technical Specifications:

  * Varies according to product, rotor speed and screen.

Technical Specifications:

v  Depending upon the characteristics of material and shape & size of tablets.

Salient Features:

ü  Handwheel provided.

ü  Turret of SG IRON 400/12 grade.

ü  Sturdy and easy fit Feed Frame with sufficient height to avoid spill over of powder.

ü  Central oil lubrication system with handpump.

ü  Cam tracks and pressure rolls made out of alloy steel for maximum wear resistance and long life. Worm is made up Phosphor Bronze.

ü  Machine is totally enclosed i.e. Top half of the machine (Compression zone) with S.S. hood, acrylic covers, and lower half of the machine complete with SS Cover in GMP Model and in standard model top hood and lower half of the machine with MS color painted. This reduces the noise level and to & fro flow of dust between compression zone and machine room.

ü  Anti vibration mounting provided, hence no foundation required.

ü  Large paints free compression zone with plenty of space for ease of cleaning & accessibility of components in GMP Model.

ü  Ease of operation and maintenance.

ü  Friction plate is provided on cam plate to minimize wear & tear of cam track, which also facilitates its easy replacement.

ü  Fly over on upper punch is provided to avoid the jumping of upper punches.

ü  Reverse direction motion protection is provided to avoid major accident.

ü  Imported needle roller bearing provided at the bottom of turret, which is immersed in oil for frictionless rotation.

ü  Aluminum covers for rotor teeth.

MINI MULTI MILL MACHINE:

ü  Direction of beaters can be changed by reversible switch.

ü  All contact parts can be easily and quickly dismantled and cleaned.

ü  Machine is designed for continuous operation.

ü  Cylindrical screen for higher output.

ü  Castor wheels provided for mobility.

ü  Flameproof electrical components can be provided at extra cost.

ü  Beaters and scraper blades of S.S. 316 quality.

S. S. Perforated Screens:

·         0.5, 1.0, 1.5 mm Hole Dia.

·         2, 3, 4, 5, 6 mm Hole Dia.

·         7, 8, 10, 15, 20, 25 mm Hole Dia.

S. S. Wire Mesh Sieve:

·         4, 6, 8, 10, 12, 14, 16, 20, 24, 30, 40, 50, 40, 50, 60 Mesh

OSCILLATING GRANULATOR MACHINE:-

ü  Sturdy and durable.

ü  Easy to operate / clean / maintain.

ü  Noise level minimum.                  

ü  Large output.

ü  Continuous oscillating stirrers drive.

ü  Simple screen holding and tensioning device.

ü  Screen – Available in different size / durable / cost effective.

ü  Flameproof electrical components are available at an extra cost.

Technical Specifications:

v  Depending upon the characteristics of material and shape & size of tablets.

Salient Features:

ü  Overall Body manufactured by Mild Steel.

ü  Lower Carrier & Head Manufactured by Mild Steel.

ü  Pressure given by Hydraulic system.

ü  Dozzer Setting is control by outside of machine.

Rotary tablet compression machine
With Hand wheel and Re-designed variable speed pulley. Turret of SG IRON 400/12 grade. Sturdy and easy fit Feed Frame. Central oil lubrication system with hand pump. Totally enclosed design reduces noise level and to & fro flow of dust between compression zone and environment Anti vibration mounting provided, hence no foundation required. Higher turret speed 15 to 42 RPM Fly over on upper punch is provided to avoid the jumping of upper punches. Reverse direction motion protection is provided to avoid major accident. Imported needle roller bearing provided at the bottom of turret, which is immersed in oil for frictionless rotation. Aluminum covers for rotor teeth

Hand wheel provided.

Re-designed variable speed pulley.

Turret of SG IRON 400/12 grade.

Cam tracks and pressure rolls made out of alloy steel for maximum wear resistance and long life. Worm is made up Phosphor Bronze.

Machine is totally enclosed i.e. Top half of the machine (Compression zone) with S.S. hood, acrylic covers, and lower half of the machine complete with SS Cover in GMP Model and in standard model top hood and lower half of the machine with MS color painted. This reduces the noise level and to & fro flow of dust between compression zone and machine room.

Large paints free compression zone with plenty of space for ease of cleaning & accessibility of components in GMP Model.

Higher turret speed 15 to 42 RPM gives higher output than standard machine.

Friction plate is provided on cam plate to minimize wear & tear of cam track, which also facilitates its easy replacement.

Fly over on upper punch is provided to avoid the jumping of upper punches.

Reverse direction motion protection is provided to avoid major accident.

Imported needle roller bearing provided at the bottom of turret, which is immersed in oil for frictionless rotation.

Technical Specifications:

v Depending upon the characteristics of material and shape & size of tablets.

LAB MODEL COLLOID MILL MACHINE

ü  All contact parts are made out of SS 316.

ü  No castings are used for avoiding contamination problems.

ü  Coupling provided between motor shaft and rotor shaft for ease in maintenance in Vertical Model.

ü  Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding, resulting in the burning of the motor.

ü  Modified design of semi concave teeth in rotor and stator reduced motor HP and gives better performance in size reduction without damaging the product.

ü  Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or backlash to avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all round performance and long life of rotor and stator.

ü  Three-way ball valve for draining and re-circulation of liquids provided as standard.

ü  Contact parts can be easily disassembled for cleaning.

ü  Special design facilitates adjustment of grinding gap by an exterior screw by means of handle even during operation.

ü  Flameproof motor and flameproof rotary switch can be provided on request at extra cost.

COLLOID MILL MACHINE

ü All contact parts are made out of SS 316.

ü No castings are used for avoiding contamination problems.

ü Coupling provided between motor shaft and rotor shaft for ease in maintenance in Vertical Model.

ü Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding, resulting in the burning of the motor.

ü Modified design of semi concave teeth in rotor and stator reduced motor HP and gives better performance in size reduction without damaging the product.

ü Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or backlash to avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all round performance and long life of rotor and stator.

ü Three-way ball valve for draining and re-circulation of liquids provided as standard.

ü Contact parts can be easily disassembled for cleaning.

ü Special design facilitates adjustment of grinding gap by an exterior screw by means of handle even during operation.

ü Flameproof motor and flameproof rotary switch can be provided on request at extra cost.

v 27 stn. Heavy Duty Double Sided Rotary Tableting Machine

vdepending upon the characteristics of material and shape & size of tablets.

B4 TypeTablet Press is a high speed double sided rotary press for high output tablet production. The PRESS combines in one machine the sophistication, 

Salient Features:

ü  Re-designed construction of heavy duty double sided rotary tablet press machine.

ü  Machine meets as per all cGMP standard manufacturing practices.

ü  Turret of SG IRON 500/7 grade.

ü  Central oil lubrication system with hand pump.

ü  Machine can be equipped to compress two-layered tablets (Optional).

ü  Cam tracks and pressure rolls made out of alloy steel for maximum wear resistance and long life. Worm is made up Phosphor Bronze.

ü  Machine is totally enclosed i.e. Top half of the machine (Compression zone) with S.S. hood, acrylic covers, and lower half of the machine complete with SS Cover in GMP Model and in standard model top hood and lower half of the machine with MS color painted. This reduces the noise level and to & fro flow of dust between compression zone and machine room.

ü  Anti-vibration mounting provided, hence no foundation required. 

ü  Ease of operation and maintenance.

ü  Higher turret speed 15 to 42 RPM gives higher output than standard machine.

ü  Fly over on upper punch is provided to avoid the jumping of upper punches.

ü  Reverse direction motion protection is provided to avoid major accident.

ü  Imported needle roller bearing provided at the bottom of turret, which is immersed in oil for frictionless rotation.

ü  Aluminum covers for rotor teeth.

ü  Auto Lubrication pump will be provide on demand (Optional).

SEMI AUTOMATIC LABELLING MACHINE

ü  Compact portable model, which can be used for regular production as well as in R D Dept.

ü  Can be used in liquid, tablet etc. dept.

ü  Can be used in plastic, aluminum, pet containers etc.

ü  Change over time – 10 minutes maximum.

ü  Maintenance free

ü  Immediate pay back saving in manpower.

ü  Entire labeling area is covered with uniform gum application with minimum gum consumption.

ü  Applications: Pharmaceuticals, Chemicals, Cosmetic, Food Beverage many more.

ü All contact parts are of SS 304. SS 316 Optional.

ü Thrust bearings are provided to carry rigid and thrust load.

ü Easy for cleaning and operating.

ü Plastic dust cover provided for apparently seeing the mixing process.

ü Interlocking system at plastic dust cover is provided to avoid the accident.

ü The tilting device provided for easy unloading of the material.

Technical Specifications:

Double Cone Blender

Ø The conical shape at both ends enables uniform mixing and easy discharge.

Ø All contact parts are made out of stainless 304 or 316 quality material, as required by customer.

Ø Maximum care has been taken to ensure safe operation of the unit.

Ø Manual rotating facility with hand wheel for inching. The same will be provided with SS cover limit switch. ( In 200 Kg above model )

Ø Two nos. of safety road will be provided at back side. ( One LH side one RH side )

Ø Suitable size of butter fly valve at one end of the cone provided for material discharge hole with operable cover provided at other end of the cone for material charging cleaning.

Ø One shaft with 04 nos. of fixed baffles with mirror polished provided inside the cone.

Ø Cone will be mirror polished from the inside outside structure will be matt polished.

Ø All moving parts covered with SS304 covers.

Mass (Planetary) Mixer Machine

ü All contact parts are of SS 304. SS 316 Optional.

ü Thrust bearings are provided to carry rigid and thrust load.

ü Easy for cleaning and operating.

ü Plastic dust cover provided for apparently seeing the mixing process.

ü Interlocking system at plastic dust cover is provided to avoid the accident.

ü The tilting device provided for easy unloading of the material.

Technical Specifications:

Technical Specifications:

v  Depending upon the characteristics of material and shape & size of tablets.

Salient Features:

ü  Machine is provided in "D" tooling which facilitate the interchangeability of any "D" type tooling and also to produce tablets up to 23 mm size.

ü  Re-designed variable speed pulley.

ü  Turret of SG IRON 400/12 grade.

ü  Sturdy and easy fit Feed Frame with sufficient height to avoid spill over of powder.

ü  Central oil lubrication system with handpump.

ü  Machine can be equipped to compress two-layered tablets (Optional).

ü  Cam tracks and pressure rolls made out of alloy steel for maximum wear resistance and long life. Worm is made up Phosphor Bronze.

ü  Machine is totally enclosed i.e. Top half of the machine (Compression zone) with S.S. hood, acrylic covers, and lower half of the machine complete with SS Cover in GMP Model and in standard model top hood and lower half of the machine with MS color painted. This reduces the noise level and to & fro flow of dust between compression zone and machine room.

ü  Anti vibration mounting provided, hence no foundation required.

ü  Large paints free compression zone with plenty of space for ease of cleaning & accessibility of components in GMP Model.

ü  Ease of operation and maintenance.

ü  Higher turret speed 15 to 42 RPM gives higher output than standard machine.

ü  Friction plate is provided on cam plate to minimize wear & tear of cam track, which also facilitates its easy replacement.

ü  Fly over on upper punch is provided to avoid the jumping of upper punches.

ü  Reverse direction motion protection is provided to avoid major accident.

ü  Imported needle roller bearing provided at the bottom of turret, which is immersed in oil for frictionless rotation.

ü  Aluminum covers for rotor teeth.

ü Noiseless Maintenance free unit.

ü Electric power consumption is very less compare to other machines of the kind.

ü Height adjustment facility provided with the unit to suit with any Rotary tableting Machine.

ü All contact parts made of SS 316 and components can be easily washed and/or sterilized.

ü Tablet conveying route is so geometrically designed for impingement of tablets on their burrs, which can break easily.

ü Efficient De-Burring De-Dusting and full suction output is concentrated on De-Dusting zone for flushing out powder.

COLLOID MILL MACHINE

ü All contact parts are made out of SS 316.

ü No castings are used for avoiding contamination problems.

ü Coupling provided between motor shaft and rotor shaft for ease in maintenance in Vertical Model.

ü Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding, resulting in the burning of the motor.

ü Modified design of semi concave teeth in rotor and stator reduced motor HP and gives better performance in size reduction without damaging the product.

ü Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or backlash to avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all round performance and long life of rotor and stator.

ü Three-way ball valve for draining and re-circulation of liquids provided as standard.

ü Contact parts can be easily disassembled for cleaning.

ü Special design facilitates adjustment of grinding gap by an exterior screw by means of handle even during operation.

ü Flameproof motor and flameproof rotary switch can be provided on request at extra cost.